1 Inch Pneumatic Normally Open Single Acting Air Actuated Stainless Ball Valve

1 Inch Pneumatic Normally Open Single Acting Air Actuated Stainless Ball Valve
1 Inch Pneumatic Normally Open Single Acting Air Actuated Stainless Ball Valve
1 Inch Pneumatic Normally Open Single Acting Air Actuated Stainless Ball Valve

1 Inch Pneumatic Normally Open Single Acting Air Actuated Stainless Ball Valve

1 Inch Pneumatic Normally Open Stainless Steel Industrial Air Actuated Ball Valve Single Acting (Spring Return). WIC Valve PVS series 1 Inch NPT pneumatic air actuated valve ball valve comes with a stainless steel 3-piece ball valve body, it provides a easy installation and maintenance through the slide out body method. This industrial air actuated valve is used to control the on and off of the valve for media such as air, gas, liquid, water and steam. PVS series single acting air actuated ball valve use air pressure to close the valve and springs to open the valve. The characteristic of the air actuated ball valve is that it has a higher flow rate, higher temperature resistant and higher pressure compare with the direct acting valve.

PVS Series Pneumatic Air Actuator Ball Valve Specifications. Valve Type: 2 Way Normally Open. Service Media: Air, Gas, Liquid, Water, Steam. Operation Model: Air Actuated Single Acting (Spring Return). Actuator Operating Pressure: 100 PSI Standard. Body Material: 316 Stainless Steel / CF8M. Operating Pressure: 0 to 1000 PSI at 100 °F. Media Temperature: -51 to 230 °C (-60 to 450 °F).

Ambient Temperature: -20 to 80 °C (-4 to 176 °F). 1 NPT Female Port Standard. ISO 5211, NAMUR, DIN 3337.

Min: 45 PSI - Max:120 PSI. 3 Pieces Stainless Steel Ball Valve Specification. Operating Temperature: -60 to 450°F. Mounting Standard: ISO 5211, DIN 3203-M3. Ball Valve Parts and Materials.

WIC Valve PVS Series Pneumatic Air Actuator Internal Structure. Indicator: Position indicator with NAMUR mounting standard. Pinion: High precision piston is made by nickelled alloy steel. Fully conform with ISO5211, DIN3337 and Namur. Actuator Body: Extruded aluminum alloy ASTM6005 body. O-Rings: High quality NBR (Buna-N).

Pistons: Die-casting aluminum twin rack pistons are treated with hard anodized. Symmetric mounting position that ensure a fast operation and long cycle life.

Travel Adjustment bolts: Two independent external travel adjustment bolts allow ±5° adjustment for both open and close directions. End Caps: Die-casting aluminum powder polyester.

High Performance Springs: Preloaded coating springs are made by high quality material for corrosion resistant. Bearing & Guides: Made by low friction compound material to minimize the direct contact between metals. PVS Series Air Actuator Component Drawing.

PVS Series Air Actuator Operating Principle. Pressurized air is introduced to Port A that forces the pistons outward. It causes the springs to compress and the piston turns counterclockwise which closes the valve. Meanwhile air is being exhausted from port B (See Drawing 1). When the pressurized air is not applied to Port A, the air pressure loss.

The compressed springs extend and forces the pistons inward. As the springs extend, it rotate the actuator and the pinion turns clockwise which opens the valve.

Pneumatic Actuator Dimension & Mounting Connection. S hipping on this item is FREE within the.

In the event you are unsatisfied, you may return the item providing it is in the same condition as received within 30 days of your invoice date. All damaged and / or defective items must be reported within 5 days of receipt.

We are more than happy to assist you. This item is in the category "Business & Industrial\Hydraulics, Pneumatics, Pumps & Plumbing\Valves & Manifolds\Other Valves & Manifolds". The seller is "wicvalve" and is located in this country: US. This item can be shipped worldwide.
1 Inch Pneumatic Normally Open Single Acting Air Actuated Stainless Ball Valve